3d Printed lvl 3 SG

Fat-Suzy · 10-31-2015, 09:18 PM

Ok so a week ago i put together a reprap prusa i3 3d printer from a kit i bought online. Im still working on fine tuning all the settings so the print is still a little messy, ill make a better one in future.

I thought some of you might be interested in my latest test piece, a lvl 3 sg from FF! I took the .mdl file from the game and ran it through a program called crowbar to decompile it to a .smd file. From there i used BlenderSourceTools to import the file into blender which allows me to export as a .stl file.

I loaded the .stl up in a print control and slicing program called MatterControl which i have found to make the best prints for this sort of situation.

After 3 hours of melting plastic i had a big mess which took a bit of filing and sanding to get to the product you see before you.

I drilled out all the pivot points and glued in 3mm neodymium magnets so it can move around as it does in game. (the dish on top is too fragile to have moving).

If anyone is interested in the stl file to print your own pm me, or with the dev's permission ill post it.

Exiled · 10-31-2015, 11:57 PM

No but seriously... How much?

R00Kie · 11-01-2015, 03:26 AM

That is so awesome.

**Bully** · 11-01-2015, 11:17 AM

Amazing

KubeDawg · 11-01-2015, 03:14 PM

Legit!

AirTrek · 11-01-2015, 08:52 PM

That is kick ass, man. Can we get a video or a gif of it moving around???

Fat-Suzy · 11-02-2015, 06:14 AM

Quote:

Originally Posted by AirTrek

That is kick ass, man. Can we get a video or a gif of it moving around???

ok.

**Bully** · 11-02-2015, 08:45 AM

Brilliant! Is it possible to paint that plastic ?

Fat-Suzy · 11-02-2015, 05:53 PM

Quote:

Originally Posted by Bully

Brilliant! Is it possible to paint that plastic ?

Uh im going to say yes... i always planned on painting one of these. Its printed with ABS plastic, same stuff car bumpers or lego bricks are made from

FDA_Approved · 11-02-2015, 06:40 PM

I've been thinking about having an SG print done up on shapeways. You can do full color sandstone, or I imagine you could hand paint any of their plastics if you wanted. But if I did get something printed up I'd go for a metal lvl 1 sg. Would be sick.

AfterShock · 11-02-2015, 09:12 PM

I'll buy one.

Exiled · 11-03-2015, 11:19 PM

ok, i'm serious...... How much Suzy?

Fat-Suzy · 11-03-2015, 11:51 PM

Quote:

Originally Posted by Exiled

ok, i'm serious...... How much Suzy?

lol i never intended on actually selling any its not really my model to sell. I didnt realise how popular this would be, if you want me to make one for you it would cost around 30usd excluding shipping. I do feel terrible asking for so much but it does take 3ish hours to print and then another hour or so to clean up and magnetize.

If you want it printed quicker and more professionally i'd probably go to shapeways. their cheapest price for the same model in plastic is 27 usd but that would require you to source your own magnets and assemble yourself.

Does anyone know how i can get in touch with sev, the original designer? Id like his approval before i distribute the source file.

trepid_jon · 11-11-2015, 02:41 AM

Hero.

That's seriously awesome.

caesium · 11-24-2015, 12:16 PM

I WANT.

Approx how much would it cost to print a map like schtop (with the roofs removed so I can see in of course!!) about 1m square?

tfcwings · 11-25-2015, 01:20 AM

Awesome!

Now to make it actually functional, but non-lethally. I've had the idea that I'd like a life-sized SG to shoot water-based ammo, for example high-powered squirt guns for the cannons and either snowballs or water balloons for the rocket launcher part.

davidjame · 12-08-2015, 07:32 AM

Quote:

Originally Posted by Fat-Suzy

Uh im going to say yes... i always planned on painting one of these. Its printed with ABS plastic, same stuff car bumpers or lego bricks are made from

Where to buy this Printer? bro

Fat-Suzy · 12-10-2015, 08:41 AM

Quote:

Originally Posted by davidjame

Where to buy this Printer? bro

check the links in the op

Headz · 01-27-2016, 12:20 AM

dam this is proper sweet, sell me a kit !!
Real nice job there Suzy.

Iggy · 02-04-2016, 12:38 AM

Quote:

Originally Posted by Fat-Suzy

lol i never intended on actually selling any its not really my model to sell. I didnt realise how popular this would be, if you want me to make one for you it would cost around 30usd excluding shipping. I do feel terrible asking for so much but it does take 3ish hours to print and then another hour or so to clean up and magnetize.

If you want it printed quicker and more professionally i'd probably go to shapeways. their cheapest price for the same model in plastic is 27 usd but that would require you to source your own magnets and assemble yourself.

Does anyone know how i can get in touch with sev, the original designer? Id like his approval before i distribute the source file.

Honestly, I don't think that price is outrageous at all. 3D printing is still "new" technology, so naturally, it's going to be a bit costly.

I don't know how to contact Sev, but considering the model is a part of the game, and only people who play the game would be interested(and you're not really making a profit on it)...... If Squeek gives the ok(he's the last remaining Dev that I know of)..... I wouldn't feel bad about it.

I can appreciate your point of view, though. Pretty honourable, if you ask me.

10-31-2015, 09:18 PM	#1
Fat-Suzy Server Owner Join Date: Feb 2015 Location: New Zealand Class/Position: Engineer / Heavy. Gametype: Capture the Flag Affiliations: {TALOS} Posts Rated Helpful 75 Times	3d Printed lvl 3 SG Ok so a week ago i put together a reprap prusa i3 3d printer from a kit i bought online. Im still working on fine tuning all the settings so the print is still a little messy, ill make a better one in future. I thought some of you might be interested in my latest test piece, a lvl 3 sg from FF! I took the .mdl file from the game and ran it through a program called crowbar to decompile it to a .smd file. From there i used BlenderSourceTools to import the file into blender which allows me to export as a .stl file. I loaded the .stl up in a print control and slicing program called MatterControl which i have found to make the best prints for this sort of situation. After 3 hours of melting plastic i had a big mess which took a bit of filing and sanding to get to the product you see before you. I drilled out all the pivot points and glued in 3mm neodymium magnets so it can move around as it does in game. (the dish on top is too fragile to have moving). If anyone is interested in the stl file to print your own pm me, or with the dev's permission ill post it.
	14 members found this post helpful.

11-01-2015, 03:26 AM	#3
R00Kie Kawaii!　ルーキー Lua Team Wiki Team Fortress Forever Staff Join Date: Jan 2008 Location: Nowhere, Kansas Class/Position: Random Gametype: CTF Affiliations: BiG, Kawaii!, MustacheBrigade, GoodFellas Posts Rated Helpful 82 Times	That is so awesome. __________________ Released: [ Island ] [ Rookie ] [ Limbo ] [ Sonic ] [ Tomb ] [ Skydive2 ] [ Bunkerwars ] Beta: [ Argon ] [ Reflection ] [ Urbantag ] Lua: [ game_rules ]

11-01-2015, 11:17 AM	#4
Bully Beta Tester Fortress Forever Staff Join Date: Mar 2007 Location: Yorkshire, England Class/Position: Spectating Gametype: British Bulldogs Affiliations: ®™ ^ Posts Rated Helpful 67 Times	Amazing __________________ ®™ Support FF:

11-01-2015, 03:14 PM	#5
KubeDawg Nade Whore Server Owner Beta Tester Join Date: Sep 2007 Location: Oklahoma Class/Position: Scout/Soldier Gametype: CTF/TDM Affiliations: blunt. Moto Posts Rated Helpful 128 Times	Legit! __________________ Moto's Funhouse \| Dallas, TX - 74.91.114.247:27015 ff_plunder - Complete

11-01-2015, 08:52 PM	#6
AirTrek Freedom of Movement Join Date: Apr 2014 Gametype: Attack and Defend Posts Rated Helpful 21 Times	That is kick ass, man. Can we get a video or a gif of it moving around??? __________________ ˙·٠•●My customs●•٠·˙ /=/ Shotty /=/ GrenLauncher /=/ Gloves /=/ SShotty (by FDA/edited by me) /=/ Nailgun /=/

10-31-2015, 11:57 PM	#2
Exiled Join Date: Jun 2010 Gametype: Capture the Flag Posts Rated Helpful 0 Times	No but seriously... How much?

11-02-2015, 08:45 AM	#8
Bully Beta Tester Fortress Forever Staff Join Date: Mar 2007 Location: Yorkshire, England Class/Position: Spectating Gametype: British Bulldogs Affiliations: ®™ ^ Posts Rated Helpful 67 Times	Brilliant! Is it possible to paint that plastic ? __________________ ®™ Support FF:

11-02-2015, 06:40 PM	#10
FDA_Approved Beta Tester Join Date: Nov 2011 Gametype: Capture the Flag Posts Rated Helpful 293 Times	I've been thinking about having an SG print done up on shapeways. You can do full color sandstone, or I imagine you could hand paint any of their plastics if you wanted. But if I did get something printed up I'd go for a metal lvl 1 sg. Would be sick. __________________ Currently equipped: Rad Scarf of liberating happiness. Last edited by FDA_Approved; 11-02-2015 at 06:40 PM.

11-02-2015, 09:12 PM	#11
AfterShock Fortress Forever Staff Join Date: Mar 2007 Posts Rated Helpful 45 Times	I'll buy one.

11-03-2015, 11:19 PM	#12
Exiled Join Date: Jun 2010 Gametype: Capture the Flag Posts Rated Helpful 0 Times	ok, i'm serious...... How much Suzy?

11-11-2015, 02:41 AM	#14
trepid_jon Fortress Forever Staff Join Date: Feb 2005 Location: Dallas, TX Class/Position: D Civilian Gametype: Rocket Jousting Affiliations: EAFD Posts Rated Helpful 78 Times	Hero. That's seriously awesome. __________________ Support FF: Trepid steamcommunity.com/id/trepid_jon/

11-24-2015, 12:16 PM	#15
caesium Fortress Forever Staff Join Date: Mar 2007 Location: europe Class/Position: anything Gametype: everything Affiliations: #teamfail Posts Rated Helpful 27 Times	I WANT. Approx how much would it cost to print a map like schtop (with the roofs removed so I can see in of course!!) about 1m square? __________________ Support FF:

11-25-2015, 01:20 AM	#16
tfcwings Join Date: May 2008 Posts Rated Helpful 2 Times	Awesome! Now to make it actually functional, but non-lethally. I've had the idea that I'd like a life-sized SG to shoot water-based ammo, for example high-powered squirt guns for the cannons and either snowballs or water balloons for the rocket launcher part.
	2 members found this post helpful.

01-27-2016, 12:20 AM	#19
Headz Join Date: Mar 2013 Location: England Posts Rated Helpful 81 Times	dam this is proper sweet, sell me a kit !! Real nice job there Suzy. __________________ Compile error: Leaf portal saw into Cluster Phuck

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)