VHE help

totoro^vi · 04-13-2008, 07:54 PM

Alright, so recently I finally felt like finishing some maps I've had around and after a few days of work my Hammer editor slowly started to sink into the dark abyss that has now wholly engulfed it.

My initial problem with it was that hammer refused to load models that I previously had no problems with (trees / bushes / etc). Also trying to bring any models up in the model selector through hammer or through the model viewer tool would cause a crash. Now, however, it has degraded into to something that I can't work with at all. The entire display isn't working and still doesnt even after I re-did the FF game tab (thanks tyr). This holds true for old map files and when I try to create a new map.

I am nearly positive that I didn't change any options as I don't have much reason to ever mess with those tabs, although I did check to make sure I didn't do anything too stupid, and unless I found some hotkey Hammer has seemingly done this to itself.

One thing to note: These problems occured between loads of SDK / Hammer and never while I was using the program.

Anyways, http://tinypic.com/view.php?pic=2gsepsi&s=3 is what I'm currently dealing with and any help would be greatly appreciated.

Doompiggy · 04-15-2008, 07:11 AM

Reinstalled yet? Did you change any of your 3dview settings?

totoro^vi · 04-16-2008, 06:31 PM

No on both, although I went to check my view settings. Actually, changing my view settings doesnt change the display at all at the moment /sigh.

I wanted to avoid the uninstall but I don't think I have much of a choice at this point. Oh well, I'll try it when I'm back home later.

04-13-2008, 07:54 PM	#1
totoro^vi Join Date: Jul 2007 Location: Los Angeles Posts Rated Helpful 0 Times	VHE help Alright, so recently I finally felt like finishing some maps I've had around and after a few days of work my Hammer editor slowly started to sink into the dark abyss that has now wholly engulfed it. My initial problem with it was that hammer refused to load models that I previously had no problems with (trees / bushes / etc). Also trying to bring any models up in the model selector through hammer or through the model viewer tool would cause a crash. Now, however, it has degraded into to something that I can't work with at all. The entire display isn't working and still doesnt even after I re-did the FF game tab (thanks tyr). This holds true for old map files and when I try to create a new map. I am nearly positive that I didn't change any options as I don't have much reason to ever mess with those tabs, although I did check to make sure I didn't do anything too stupid, and unless I found some hotkey Hammer has seemingly done this to itself. One thing to note: These problems occured between loads of SDK / Hammer and never while I was using the program. Anyways, http://tinypic.com/view.php?pic=2gsepsi&s=3 is what I'm currently dealing with and any help would be greatly appreciated.

04-15-2008, 07:11 AM	#2
Doompiggy Banned Join Date: Sep 2007 Location: Internet Posts Rated Helpful 0 Times	Reinstalled yet? Did you change any of your 3dview settings?

04-16-2008, 06:31 PM	#3
totoro^vi Join Date: Jul 2007 Location: Los Angeles Posts Rated Helpful 0 Times	No on both, although I went to check my view settings. Actually, changing my view settings doesnt change the display at all at the moment /sigh. I wanted to avoid the uninstall but I don't think I have much of a choice at this point. Oh well, I'll try it when I'm back home later.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)