09-14-2006, 05:58 PM | #1 |
Join Date: Jan 2005
Location: New Jersy, USA! reppin'
Posts Rated Helpful 0 Times
|
I love problems!
hey guys im wondering if you can help me out here. im working on a concmap for TFC and ive run into a situation where I cant get the map to load. when it attempts to load the map, TFC closes out and brings me back to my desktop. when u check map properties there are no errors.
i dont have lighting, and my options are NO RAD, VIS NORMAL, BSP NORMAL, CSG NORMAL. edit: i went over the logs again and it say something bout too many verticies? im confused Error: ReadSurfs (line 32999): 33 > MAXPOINTS This is caused by a face with too many verticies (typically found on end-caps of high-poly cylinders) |
|
09-14-2006, 06:58 PM | #2 |
Join Date: Feb 2005
Location: Finland
Posts Rated Helpful 0 Times
|
You have too many verticies, meaning that you have too much detail in it.
I didnt map back in HL times, so I cant help you with this other way than say take something out. |
|
09-14-2006, 07:30 PM | #3 |
Join Date: Jan 2005
Location: Montreal
Posts Rated Helpful 0 Times
|
Maybe you should map for FF instead?
|
|
09-14-2006, 07:49 PM | #4 |
Join Date: Jan 2005
Location: New Jersy, USA! reppin'
Posts Rated Helpful 0 Times
|
yeah its fixed, i had too many arches touching the floor texture so the engine was cutting the vis like 10000 times over.
|
|
09-15-2006, 09:10 PM | #5 |
Join Date: Mar 2005
Location: The Peoples Republic of Harmfull Free Radicals
Posts Rated Helpful 0 Times
|
func_walls are your friend.
|
|
09-17-2006, 02:00 AM | #6 |
Join Date: Jan 2005
Location: New Jersy, USA! reppin'
Posts Rated Helpful 0 Times
|
yeah that would work but they are outside solids so then i would have to make another wall behind it or it would be outside the world regardless i worked around it and actually make it look better then it was
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|