|
01-15-2008, 01:51 PM | #1 |
Wizard of Milk
|
Orange Box SDK problems? Anyone else?
I'm almost finished with my free lancing projects so I'd like to get the SDK setup so I can just jump right in and start when I do finish. Problem is I bought the Orange Box and after installing that I cannot get anything to compile. At first FF would not even load up in Hammer. I had to edit the gameinfo.txt and replace the application id with TF2's id. Now I can do everything except compile and this isn't just FF specific. I can't compile anything, whether it's HL2DM, TF2, Portal, or what not. I'm not at the computer now so I can't get the exact error message but I believe it had to do with the compiling programs; VVIS wouldn't create the '.bsp'. I scoured Valve's site for answers but all I found was a nice disclaimer note stating that "Orange Box fixed some bugs but created a lot of other bugs." So I'm gonna put my money on that but this was right after Orange Box was released.
So has anyone had the same problem or would even know why the problem exists? I've tried wiping Steam out, and not installing Orange Box, just installing the SDK through Steam. However that creates another problem. All the SDK files are now the ones used in the Orange Box product and when I goto load up Hammer, it only shows TF2, Portal, or EP2 in the 'Current Game' list, when I don't even have the games installed. I wiped Steam again, this time replacing my whole XP partition back to it's vanilla state (I have an image of XP right after an install with updates and settings set before anything has been installed after) and still goes back to Orange Box. My fix for the moment is to reinstall HL2 from the CDs I have and just add FF and work that way. But the problem is I need TF2 for my next map cause I plan on developing the same map for TF2 and FF. Any help or information on Valve's great assortment of shi..., I mean buggy, software would be great. Thanks for your time, sorry for the lengthy post but tried being as detailed as possible. |
|
01-15-2008, 05:08 PM | #2 |
Fortress Forever Staff
Join Date: Mar 2007
Posts Rated Helpful 4 Times
|
You have to set the launch option of Source SDK to "-engine ep1", and you have to pick the vbsp, vvis and vrad from the $SteamUserDir\sourcesdk\bin\ep1\bin\
directory, and finally you have to set your vmf folder inside the fortress forever folder and you have to compile with steam.exe as executable and set -applaunch 215 in the compile options' last line. |
|
01-15-2008, 08:28 PM | #3 |
Wizard of Milk
|
Yes I've found those set of instructions and still doesn't work. When I set it to engine episode 1, it doesn't even work. And the original compile programs have been replaced with the ones under Orange Box, hence the problem I tried installing without Orange Box and it still installed them. I haven't tried the applaunch so I'll try that but I don't think it's going to help the other build files. Right now I'm just trying to get it to compile TF2 maps, I can always set up a dual boot config with one image with FF compile and another image as TF2 compile. I'll let you know how it goes, thanks for the response.
|
|
01-15-2008, 09:01 PM | #4 |
Fortress Forever Staff
Join Date: Mar 2007
Location: Baton Rouge
Class/Position: Spy Affiliations: -=DoM=- Posts Rated Helpful 0 Times
|
you dont need -engine ep1 or whatever to compile tf2 maps, we're talking about FF here, you are on the Fortress Forever forums you know.
sorry to be rude, but why the hell would you ask us to help you compile TF2 maps?
__________________
-------------------------------FF_Rock2(WIP)------------------------------ ---------------------------FF_RedGiant(Released)------------------------- --------------------------FF_Fragzone_G(Released)------------------------ --------------------------FF_Civibash_G(Released)------------------------ -------------------FF_Conc_G1(WIP)-------------------- -------------------FF_Hollow_G(WIP)--------------------- |
|
01-15-2008, 09:51 PM | #5 |
Custom mapper
Join Date: Mar 2007
Posts Rated Helpful 0 Times
|
Now that its working with FF build and test with FF then install TF2 later, cross that bridge when you get there.
|
|
01-16-2008, 12:38 AM | #6 |
Wizard of Milk
|
I see my topic still isn't clear. Originally before I installed Orange Box, everything worked dandy. FF and everything else played/compiled just fine. After installing Orange Box, the Hammer editor got awry. It automatically reset the Current Game list with the games that came with Orange Box (TF2, Portal, Ep2). No big deal, just setup Hammer for FF again. Did that, couldn't load up Hammer with FF's gameinfo.txt. Had to replace the application ID to match one of the pre-existing mods (even though FF is there). Ok, so now after doing that, I can go back to making my maps with Hammer, however I cannot compile, but not just FF, TF2 or any mod as well. That's the problem. I cannot compile FF, TF2, Portal, nada. My solution for FF was to go back and reinstall the 5-disc version of HL2 when it first came out and then add FF. That's redundant and shouldn't have to. The point of asking here is because I know many people have installed Orange Box as well and are using the newly acquired Orange Box SDK files and am asking if they have ran into the same problems, and if so have figured out a solution or at least know why. If you can't help GambiT, please don't respond as it is over your head so it appears. The topic isn't meant for TF2 specific, it's for figuring out why FF and along with it all other bugs, are just that, bugged. Using 'Ep 1' as a parameter is a fix on Valve's website for the Orange Box distro so technically, yes, you would need it. However like I've stated it breaks the editor, doesn't even load. If Valve could actually produce something that worked right I'd be amazed but you can only work with what you've got.
So, in short, nothing compiles, the original SDK build files were/are replaced with the ones from Orange Box when installing/updating. I could hunt down the original SDK to even see if that works but then I couldn't compile for the newer mods, (Portal, TF2, etc). So is anyone using the current build files from Orange Box for FF and if so is it very recent that you've been or as soon as Orange Box was released (November). Thanks. |
|
01-17-2008, 05:02 PM | #7 | |
Fortress Forever Staff
Join Date: Mar 2007
Posts Rated Helpful 4 Times
|
Quote:
You probably did this but i'm just making sure. As i think i got that 'system cannot find the file.' error too, when the folder of my .vmf wasn't somewhere within the fortressforever folder. |
|
|
01-18-2008, 09:03 PM | #8 |
Darkness24713/Another
Join Date: Jan 2008
Posts Rated Helpful 0 Times
|
STEP BY STEP INSTRUCTION TO SETTING HAMMER FOR FF PICTURES INCLUDED!!
First we have to change the launch options So go to your tool section on steam. Next Right click Source SKD and click properties once your instead click on Set Launch Options In the Box type -engine ep1 (some people might have to add a -nop4 after ep1) Then click OK then click close, and start up Source SDK Start up hammer with current game as Half life 2 then once started click the tools tab up top and click options Next click Edit beside Configuration Click Add Type in Fortress Forever and click ok Next Fortress Forever Should appear and if it does Click the Close button Now you should be at Configure Hammer again, click the arrow next to Hl2 and click Fortress Forever ok fill in all the information you see in this picture for your configuration (if you have something different use that then) Game Data files $SteamDir\steamapps\SourceMods\FortressForever\for tressforever.fgd Texture Format Materials (Half-Life2) Map Type Half-Life 2 Defualt PointEntity class light Default SolidEntity class func_detail Default texture scale 0.25 Defualt lightmap scale 16 Cordon texture tools/toolsskybox Game Executable Directory $SteamDir\steamapps\SourceMods\FortressForever Game Directory $SteamDir\steamapps\SourceMods\FortressForever Hammer VMF Directory $SteamDir\steamapps\SourceMods\FortressForever\map s Next click the Build Programs Tab and under configuration click Fortress Forever Next this section should look exactly like this Game Executable $SteamUserDir\sourcesdk\hl2.exe BSP Executable $SteamUserDir\sourcesdk\bin\ep1\bin\vbsp.exe VIS Executable $SteamUserDir\sourcesdk\bin\ep1\bin\vvis.exe RAD Executable $SteamUserDir\sourcesdk\bin\ep1\bin\vrad.exe Place compiled maps in this directory before running the game $SteamDir\steamapps\SourceMods\FortressForever\map s After that click apply and then ok, and exit hammer and under current game select Fortress Forever After that start up hammer and you should be ready to go!! |
|
01-20-2008, 10:37 PM | #9 |
Join Date: Mar 2007
Posts Rated Helpful 5 Times
|
cownaetion, please do not insult me. All I was doing was trying to help you. Everything you described was indicating that you are having problems with the lauch options. If you are only getting the Orangebox games, then it is because you have not included the -engine ep1 launch option.
Darkness' tutorial was very well put together. Please follow this verbatum. Yours truly, Nodnarb |
|
01-26-2008, 03:37 AM | #10 |
Join Date: Apr 2007
Location: Hiram, GA
Posts Rated Helpful 0 Times
|
Beta Source SDK released today. You no longer need the EP1 and nop4 switches. Going to be brave and try it, wish me luck
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|