(WIP) Single Shotty replacement (skin request as well)

CocaCola · 09-26-2009, 07:07 AM

I've modeled a single shotgun replacement because i see people constantly complaining about the current one. The skin i used to test it ingame sucks ass and was 100% just to see if i could compile it and get it to work, so i need someone to see if they can create a decent skin with the uvmaps i provided (although feel free to map it yourself if you like because its not my strong suit)

pictures:
render - http://hldevs.com/shotgunfiles/shotgunrender.png
render 2 - http://hldevs.com/shotgunfiles/shotgunrender1.png
ingame w/ badass skin - http://hldevs.com/shotgunfiles/shotgungame.png

Im looking to get better at modeling, so im going to try my hand at remaking the rest of the weapons

post suggestions on which one i should do next w/ picture of what you want it to look like

also give me feed back on this model please ;D the ingame render looks like shit but i imagine it will look a little better when its got a decent skin on it (and when i find the time to get a new set of hands, because those little monkey paws that are on it now make the model look even worse)

edit: whoops i forgot to link the uvmaps dl: http://hldevs.com/shotgunfiles/shotty.zip

moosh · 09-26-2009, 09:30 AM

That looks like a mother fuc*ing rifle.

Awesome.

CocaCola · 09-26-2009, 09:41 AM

Quote:

Originally Posted by moosh

That looks like a mother fuc*ing rifle.

Awesome.

ive been told this

i modeled it after the bottom one of these
http://i44.tinypic.com/29uvpg2.jpg

i just googled 12 gauge shotgun and modeled the best looking one i could find

Dr.Satan · 09-26-2009, 03:58 PM

that looks really nice m8! Like the skinned one ingame kinda looked like a smaller sniper rifle, so I was like wtf is that. But the render's look great. Very nice job!

CocaCola · 09-26-2009, 08:13 PM

in an attempt to make it less rifle like im goint to switch out the glass sight with iron sights, alter the tip of the barrel and work on a fwe more adjustments.

im also planning on re uvmapping it so i can do a better skinning job, along with hopefully trying my hand at animating it

**Elmo** · 09-26-2009, 08:15 PM

cool man, keep it up - I'd love to see what you can do with it

CocaCola · 09-26-2009, 09:47 PM

heres a quick look at the updated version.
ive removed the glass sight and replaced it with a regular iron sight. I'm thinking of removing the adjuster that the sight sits on

http://hldevs.com/shotgunfiles/render2.png

should i remove the adjuster or keep it like that?

Dr.Satan · 09-26-2009, 10:17 PM

looks fine like that to me...just needs a sight near the end of the barrel

KubeDawg · 09-26-2009, 11:14 PM

that looks pimpin! If you're good at texturing, you should make a camo version, black version, and a wood stock version.

CocaCola · 09-27-2009, 12:36 AM

Quote:

Originally Posted by KubeDawg

that looks pimpin! If you're good at texturing, you should make a camo version, black version, and a wood stock version.

im absolutly appalling at texturing

CocaCola · 09-27-2009, 02:49 AM

Newest render
http://hldevs.com/shotgunfiles/render3.png
redid the middle and am adding the empty shell hole that shoots out the used shells

moosh · 09-27-2009, 08:32 AM

Quote:

Originally Posted by CocaCola

Newest render
http://hldevs.com/shotgunfiles/render3.png
redid the middle and am adding the empty shell hole that shoots out the used shells

Looking good.

Jester · 09-28-2009, 08:55 PM

Looks good, but definitely doesn't need a flash suppressor. That just makes it look more like a rifle than a shotgun.

Don't forget smoothing groups.

CocaCola · 09-29-2009, 03:53 AM

Quote:

Originally Posted by Jester

Looks good, but definitely doesn't need a flash suppressor. That just makes it look more like a rifle than a shotgun.

Don't forget smoothing groups.

Could you just refesh my memory on what that is?
I've just finished the model and will post pics when I get my Internet back.
I'm on my iPod ATM

pF · 09-29-2009, 06:06 PM

Smoothing Groups = "Geometry Approximation" in XSI (from what i gather).

BTW, you could save some polys if you used more intersecting geometry instead of extruding everything. Looks good though!

CocaCola · 09-30-2009, 07:09 AM

pics
http://hldevs.com/shotgunfiles/renderbeta.png
http://hldevs.com/shotgunfiles/renderbeta1.png

goin on vacation now, might uvmap on plain

gibz · 09-30-2009, 12:09 PM

How's Windows 7 ?

Dunnerski · 10-31-2009, 04:54 AM

If you looking for a skinner I might be of some use, give me a colored skin (i.e. blue barrel, green stock, red metal etc ect) and I'll see what I can do, i gotta get my photoshop back.

Btw Hi, I'm Dunn, my email is dunnerski@gmail.com if you're interested.

09-26-2009, 07:07 AM	#1
CocaCola Join Date: Dec 2008 Gametype: Capture the Flag Posts Rated Helpful 0 Times	Single Shotty replacement (skin request as well) I've modeled a single shotgun replacement because i see people constantly complaining about the current one. The skin i used to test it ingame sucks ass and was 100% just to see if i could compile it and get it to work, so i need someone to see if they can create a decent skin with the uvmaps i provided (although feel free to map it yourself if you like because its not my strong suit) pictures: render - http://hldevs.com/shotgunfiles/shotgunrender.png render 2 - http://hldevs.com/shotgunfiles/shotgunrender1.png ingame w/ badass skin - http://hldevs.com/shotgunfiles/shotgungame.png Im looking to get better at modeling, so im going to try my hand at remaking the rest of the weapons post suggestions on which one i should do next w/ picture of what you want it to look like also give me feed back on this model please ;D the ingame render looks like shit but i imagine it will look a little better when its got a decent skin on it (and when i find the time to get a new set of hands, because those little monkey paws that are on it now make the model look even worse) edit: whoops i forgot to link the uvmaps dl: http://hldevs.com/shotgunfiles/shotty.zip Last edited by CocaCola; 09-26-2009 at 07:14 AM.

09-26-2009, 03:58 PM	#4
Dr.Satan Wiki Team Fortress Forever Staff Join Date: Sep 2007 Location: Greeley, CO Class/Position: Med / Solly Gametype: PAYLOAD Affiliations: DET- Posts Rated Helpful 19 Times	that looks really nice m8! Like the skinned one ingame kinda looked like a smaller sniper rifle, so I was like wtf is that. But the render's look great. Very nice job! __________________ FF Community Map Pack(s): 1 / 2 (Released) conc_school \| hellion_classic \| ksour_PAYLOAD \| mulch_faf (Beta) alchimy_b1 (Lua) base_payload_2015 (Models) props_trainyard Support FF:

09-26-2009, 08:15 PM	#6
Elmo Gets tickled by FF Fortress Forever Staff Join Date: Jun 2007 Location: UK Class/Position: Med Solly HW Gametype: Any/CTF Posts Rated Helpful 41 Times	cool man, keep it up - I'd love to see what you can do with it __________________ Support FF: Done: ff_monkey Done: ff_bases Done: ff_warpath Forever Doing: ff_medieval (beta#99999999)

09-26-2009, 10:17 PM	#8
Dr.Satan Wiki Team Fortress Forever Staff Join Date: Sep 2007 Location: Greeley, CO Class/Position: Med / Solly Gametype: PAYLOAD Affiliations: DET- Posts Rated Helpful 19 Times	looks fine like that to me...just needs a sight near the end of the barrel __________________ FF Community Map Pack(s): 1 / 2 (Released) conc_school \| hellion_classic \| ksour_PAYLOAD \| mulch_faf (Beta) alchimy_b1 (Lua) base_payload_2015 (Models) props_trainyard Support FF:

09-26-2009, 11:14 PM	#9
KubeDawg Nade Whore Server Owner Beta Tester Join Date: Sep 2007 Location: Oklahoma Class/Position: Scout/Soldier Gametype: CTF/TDM Affiliations: blunt. Moto Posts Rated Helpful 128 Times	that looks pimpin! If you're good at texturing, you should make a camo version, black version, and a wood stock version. __________________ Moto's Funhouse \| Dallas, TX - 74.91.114.247:27015 ff_plunder - Complete

09-26-2009, 09:30 AM	#2
moosh WhenNailGrenWillOut? Beta Tester Join Date: May 2009 Gametype: mp_prematch Affiliations: [:)] - Frag Happy, babe\| Posts Rated Helpful 29 Times	That looks like a mother fuc*ing rifle. Awesome.

09-26-2009, 08:13 PM	#5
CocaCola Join Date: Dec 2008 Gametype: Capture the Flag Posts Rated Helpful 0 Times	in an attempt to make it less rifle like im goint to switch out the glass sight with iron sights, alter the tip of the barrel and work on a fwe more adjustments. im also planning on re uvmapping it so i can do a better skinning job, along with hopefully trying my hand at animating it

09-26-2009, 09:47 PM	#7
CocaCola Join Date: Dec 2008 Gametype: Capture the Flag Posts Rated Helpful 0 Times	heres a quick look at the updated version. ive removed the glass sight and replaced it with a regular iron sight. I'm thinking of removing the adjuster that the sight sits on http://hldevs.com/shotgunfiles/render2.png should i remove the adjuster or keep it like that?

09-27-2009, 02:49 AM	#11
CocaCola Join Date: Dec 2008 Gametype: Capture the Flag Posts Rated Helpful 0 Times	Newest render http://hldevs.com/shotgunfiles/render3.png redid the middle and am adding the empty shell hole that shoots out the used shells

09-28-2009, 08:55 PM	#13
Jester Fortress Forever Staff Join Date: Sep 2007 Class/Position: O: Scout Affiliations: {NFO} - New Family Order Posts Rated Helpful 0 Times	Looks good, but definitely doesn't need a flash suppressor. That just makes it look more like a rifle than a shotgun. Don't forget smoothing groups.

09-29-2009, 06:06 PM	#15
pF no war but class war Fortress Forever Staff Join Date: Oct 2007 Location: big bad berlin Class/Position: Soldier / Scout Gametype: ctf Affiliations: [w~k!] Posts Rated Helpful 3 Times	Smoothing Groups = "Geometry Approximation" in XSI (from what i gather). BTW, you could save some polys if you used more intersecting geometry instead of extruding everything. Looks good though! __________________ Support FF: Gay And Lesbian Fiction \| Teen Books \| Bath Products

09-30-2009, 07:09 AM	#16
CocaCola Join Date: Dec 2008 Gametype: Capture the Flag Posts Rated Helpful 0 Times	pics http://hldevs.com/shotgunfiles/renderbeta.png http://hldevs.com/shotgunfiles/renderbeta1.png goin on vacation now, might uvmap on plain

09-30-2009, 12:09 PM	#17
gibz Title title title title Join Date: Jun 2009 Location: VA Class/Position: Medic O, Soldier D Gametype: CTF, Water Battle Affiliations: :e0: and n-t Posts Rated Helpful 0 Times	How's Windows 7 ? __________________

10-31-2009, 04:54 AM	#18
Dunnerski International Shenanigans Join Date: Oct 2009 Location: NE Indiana Class/Position: All D \| Spy/Pyro O Gametype: CTF Affiliations: None Posts Rated Helpful 0 Times	If you looking for a skinner I might be of some use, give me a colored skin (i.e. blue barrel, green stock, red metal etc ect) and I'll see what I can do, i gotta get my photoshop back. Btw Hi, I'm Dunn, my email is dunnerski@gmail.com if you're interested. Last edited by Dunnerski; 10-31-2009 at 05:05 AM.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)