What is wrong with my compile

Dr.Satan · 04-23-2008, 10:47 PM

Ok so this is my compile log:

http://privatepaste.com/610FfEIMB5

And I pasted it into interlopers and it gives me this:

http://www.interlopers.net/index.php...&e=4-3,4-4,4-5

But now when I load up my map...most of my lights are fine, but for some reason the most recent ones I added (2 / 4 compiles ago) still won't show up. I know the setting are correct cause I have checked and re-checked them time and time again. But they just don't show up at all.

Can someone with experience browse through my compile log and see what's going on?

BumGravy · 04-24-2008, 12:43 AM

You have too many entities.

Quote:

Originally Posted by lines 14+15

Brush 943732: num_entities == MAX_MAP_ENTITIES

Side 5

Texture: METAL/METALTRUSS026A

MAX_MAP_ENTITIES - 4096. Both brush entities and point-entities will be considered in this count.

keep removing stuff and compiling until you stop getting the error above.

Dr.Satan · 04-24-2008, 03:05 AM

thank you...elmo pm'd me on irc too and figured it out for me. I think I got it working now.

Is there anywhere that tells you how many you can have? I did the report and it seemed fine.

BumGravy · 04-24-2008, 01:08 PM

I think its 4096, not including func_details. So in entity report, select everything but the func_details and it will tell you how many objects it is.

Dr.Satan · 04-24-2008, 02:07 PM

Awesome ty man!

BumGravy · 04-24-2008, 11:27 PM

Np. Hows it looking? I hope you arent getting this error after following my advice on making a million teleporter entities to stop players getting stuck

Dr.Satan · 04-24-2008, 11:38 PM

Quote:

Originally Posted by BumGravy

Np. Hows it looking? I hope you arent getting this error after following my advice on making a million teleporter entities to stop players getting stuck

lol nah actually this happened before the teleporter thing I just didn't think it was anything big b/c it didn't show up at interlopers...then when I tried to see my rooms for lighting I was like WTF!

It's coming along good...I need to find a few leaks, finish perfecting jump 14 / 15 to be the right proportions and add in the juggle and teleporter room, locations, and triggers and it'll be done...lol that sounded like less in my head.

Dr.Satan · 04-25-2008, 04:15 PM

Ok so now I'm really fucking confused...

I'm trying to fix my leaks...I got one down and ran the point file again and got another leak, but this one is confusing as hell.

The pointfile starts outside of my skybox and ends outside of it. It doesn't attach to an entity at all and I know my skybox is closed off b/c I deleted it and remade it 3 times now. How can I have a leak that is not even in my map at all?

BumGravy · 04-25-2008, 05:18 PM

Compiiiiiiiiile loooooooooooooooog

Dr.Satan · 04-25-2008, 05:21 PM

Quote:

Originally Posted by BumGravy

Compiiiiiiiiile loooooooooooooooog

yeah I know...I have to wait until I go home for lunch to post it

probably about 30min or so.

**Crazycarl** · 04-25-2008, 05:46 PM

Don't run vrad if there's a leak. There's no point and with no vis information it takes extra long because it's forced to light the whole outside of the map as well as the inside.

For the leak: You probably have a brush entity (like a trigger or something) that got its origin moved somewhere outside the map. If this is the case you won't see it unless you have "helpers" activated and select the entity in question. The compile log will tell you which entity is generating the leak, so start with that one. If you don't get a name, just select the whole map (or just the entites), make sure helpers are on and look at both ends of the pointfile. You'll probably see a little circle there. Move it back into the map, where it's supposed to be.

GambiT · 04-25-2008, 06:06 PM

as he said or go to select all and look at the area of the poinfile in the 3d view

Dr.Satan · 04-25-2008, 06:14 PM

Ok your probably right carl, I remember that it references a trigger_ff_script (no name just that) but thats probably it...I'll check now, headed home in about 2min.

If not I'll post my logs.

and yeah I haven't been running vvis just b/c of that.

Jester · 04-25-2008, 06:17 PM

Make sure none of your outside walls are func_details or displacements. Since neither of those block vis, they will create leaks if used for outside walls.

Dr.Satan · 04-25-2008, 07:39 PM

yeah that was it, thanks guys!

That was the only other leak I had...shouldn't be long now!

KubeDawg · 04-25-2008, 07:43 PM

*pees pants* OMG can't wait!

zE · 05-09-2008, 09:25 AM

materialPath: c:\games\steam\steamapps\SourceMods\FortressForeve r\materials
Loading C:\Documents and Settings\Moi\Desktop\MAPS\rui.vmf
fixing up env_cubemap materials on brush sides...
0...1...2...3...4...5...6...7...8...9...100...1... 2...3...4...5...6...7...8...9...10Processing areas...done (0)
Building Faces...done (0)
Chop Details...done (0)
Find Visible Detail Sides...done (0)
Merging details...done (0)
FixTjuncs...
PruneNodes...
WriteBSP...
NODRAW on terrain surface!
NODRAW on terrain surface!
NODRAW on terrain surface!
NODRAW on terrain surface!
NODRAW on terrain surface!
NODRAW on terrain surface!
NODRAW on terrain surface!
NODRAW on terrain surface!
NODRAW on terrain surface!
NODRAW on terrain surface!
NODRAW on terrain surface!
NODRAW on terrain surface!
NODRAW on terrain surface!
NODRAW on terrain surface!
NODRAW on terrain surface!
NODRAW on terrain surface!
NODRAW on terrain surface!
NODRAW on terrain surface!
NODRAW on terrain surface!
NODRAW on terrain surface!
NODRAW on terrain surface!
NODRAW on terrain surface!
NODRAW on terrain surface!
NODRAW on terrain surface!
NODRAW on terrain surface!
NODRAW on terrain surface!
NODRAW on terrain surface!
done (0)
writing C:\Documents and Settings\Moi\Desktop\MAPS\rui.prt...done (0)
Creating default cubemaps for env_cubemap using skybox materials:
skybox/ff_sky_clearblue*.vmt
Run buildcubemaps in the engine to get the correct cube maps.

No such variable "$hdrbasetexture" for material "skybox/ff_sky_clearbluert"
Can't load skybox file skybox/ff_sky_clearblue to build the default cubemap!
Finding displacement neighbors...
Finding lightmap sample positions...
Displacement Alpha : 0...1...2...3...4...5...6...7...8...9...10
Building Physics collision data...
done (1) (231569 bytes)
Placing detail props : 0...1...2...3...4...5...6...7...8...9...10
Compacting texture/material tables...
Reduced 1571 texinfos to 550
Reduced 89 texdatas to 72 (2973 bytes to 2385)
Writing C:\Documents and Settings\Moi\Desktop\MAPS\rui.bsp
4 seconds elapsed

2 threads
reading c:\documents and settings\moi\desktop\maps\rui.bsp
reading c:\documents and settings\moi\desktop\maps\rui.prt
2296 portalclusters
7987 numportals
0...1...2...3...4...5...6...7...8...9...100...1... 2...3...4...5...6...7...8...9.

This last part is taking some insane time no idea why..

**squeek.** · 05-10-2008, 04:17 AM

Quote:

Originally Posted by =AS= zE

This last part is taking some insane time no idea why..

Time to start reading.

http://developer.valvesoftware.com/w..._Compile_Times

zE · 05-10-2008, 06:09 AM

wow.. really hate that optimization stuff

i think i gonna stick for the betas lolz

**squeek.** · 05-10-2008, 05:56 PM

Quote:

Originally Posted by =AS= zE

wow.. really hate that optimization stuff

i think i gonna stick for the betas lolz

You're going to have to do it sometime. There is no escaping optimization.

And, you shouldn't have NODRAW on a displacement surface.

04-23-2008, 10:47 PM	#1
Dr.Satan Wiki Team Fortress Forever Staff Join Date: Sep 2007 Location: Greeley, CO Class/Position: Med / Solly Gametype: PAYLOAD Affiliations: DET- Posts Rated Helpful 19 Times	What is wrong with my compile Ok so this is my compile log: http://privatepaste.com/610FfEIMB5 And I pasted it into interlopers and it gives me this: http://www.interlopers.net/index.php...&e=4-3,4-4,4-5 But now when I load up my map...most of my lights are fine, but for some reason the most recent ones I added (2 / 4 compiles ago) still won't show up. I know the setting are correct cause I have checked and re-checked them time and time again. But they just don't show up at all. Can someone with experience browse through my compile log and see what's going on? __________________ FF Community Map Pack(s): 1 / 2 (Released) conc_school \| hellion_classic \| ksour_PAYLOAD \| mulch_faf (Beta) alchimy_b1 (Lua) base_payload_2015 (Models) props_trainyard Support FF:

04-24-2008, 03:05 AM	#3
Dr.Satan Wiki Team Fortress Forever Staff Join Date: Sep 2007 Location: Greeley, CO Class/Position: Med / Solly Gametype: PAYLOAD Affiliations: DET- Posts Rated Helpful 19 Times	thank you...elmo pm'd me on irc too and figured it out for me. I think I got it working now. Is there anywhere that tells you how many you can have? I did the report and it seemed fine. __________________ FF Community Map Pack(s): 1 / 2 (Released) conc_school \| hellion_classic \| ksour_PAYLOAD \| mulch_faf (Beta) alchimy_b1 (Lua) base_payload_2015 (Models) props_trainyard Support FF:

04-24-2008, 02:07 PM	#5
Dr.Satan Wiki Team Fortress Forever Staff Join Date: Sep 2007 Location: Greeley, CO Class/Position: Med / Solly Gametype: PAYLOAD Affiliations: DET- Posts Rated Helpful 19 Times	Awesome ty man! __________________ FF Community Map Pack(s): 1 / 2 (Released) conc_school \| hellion_classic \| ksour_PAYLOAD \| mulch_faf (Beta) alchimy_b1 (Lua) base_payload_2015 (Models) props_trainyard Support FF:

04-25-2008, 04:15 PM	#8
Dr.Satan Wiki Team Fortress Forever Staff Join Date: Sep 2007 Location: Greeley, CO Class/Position: Med / Solly Gametype: PAYLOAD Affiliations: DET- Posts Rated Helpful 19 Times	Ok so now I'm really fucking confused... I'm trying to fix my leaks...I got one down and ran the point file again and got another leak, but this one is confusing as hell. The pointfile starts outside of my skybox and ends outside of it. It doesn't attach to an entity at all and I know my skybox is closed off b/c I deleted it and remade it 3 times now. How can I have a leak that is not even in my map at all? __________________ FF Community Map Pack(s): 1 / 2 (Released) conc_school \| hellion_classic \| ksour_PAYLOAD \| mulch_faf (Beta) alchimy_b1 (Lua) base_payload_2015 (Models) props_trainyard Support FF:

04-25-2008, 05:46 PM	#11
Crazycarl D&A Member Wiki Team Fortress Forever Staff Join Date: Apr 2007 Posts Rated Helpful 31 Times	Don't run vrad if there's a leak. There's no point and with no vis information it takes extra long because it's forced to light the whole outside of the map as well as the inside. For the leak: You probably have a brush entity (like a trigger or something) that got its origin moved somewhere outside the map. If this is the case you won't see it unless you have "helpers" activated and select the entity in question. The compile log will tell you which entity is generating the leak, so start with that one. If you don't get a name, just select the whole map (or just the entites), make sure helpers are on and look at both ends of the pointfile. You'll probably see a little circle there. Move it back into the map, where it's supposed to be. __________________ Support FF:

04-24-2008, 01:08 PM	#4
BumGravy Black Cyclops Join Date: Mar 2007 Location: Scotland Posts Rated Helpful 0 Times	I think its 4096, not including func_details. So in entity report, select everything but the func_details and it will tell you how many objects it is.

04-24-2008, 11:27 PM	#6
BumGravy Black Cyclops Join Date: Mar 2007 Location: Scotland Posts Rated Helpful 0 Times	Np. Hows it looking? I hope you arent getting this error after following my advice on making a million teleporter entities to stop players getting stuck

04-25-2008, 05:18 PM	#9
BumGravy Black Cyclops Join Date: Mar 2007 Location: Scotland Posts Rated Helpful 0 Times	Compiiiiiiiiile loooooooooooooooog

04-25-2008, 06:06 PM	#12
GambiT Fortress Forever Staff Join Date: Mar 2007 Location: Baton Rouge Class/Position: Spy Affiliations: -=DoM=- Posts Rated Helpful 0 Times	as he said or go to select all and look at the area of the poinfile in the 3d view __________________ -------------------------------FF_Rock2(WIP)------------------------------ ---------------------------FF_RedGiant(Released)------------------------- --------------------------FF_Fragzone_G(Released)------------------------ --------------------------FF_Civibash_G(Released)------------------------ -------------------FF_Conc_G1(WIP)-------------------- -------------------FF_Hollow_G(WIP)---------------------

04-25-2008, 06:14 PM	#13
Dr.Satan Wiki Team Fortress Forever Staff Join Date: Sep 2007 Location: Greeley, CO Class/Position: Med / Solly Gametype: PAYLOAD Affiliations: DET- Posts Rated Helpful 19 Times	Ok your probably right carl, I remember that it references a trigger_ff_script (no name just that) but thats probably it...I'll check now, headed home in about 2min. If not I'll post my logs. and yeah I haven't been running vvis just b/c of that. __________________ FF Community Map Pack(s): 1 / 2 (Released) conc_school \| hellion_classic \| ksour_PAYLOAD \| mulch_faf (Beta) alchimy_b1 (Lua) base_payload_2015 (Models) props_trainyard Support FF:

04-25-2008, 06:17 PM	#14
Jester Fortress Forever Staff Join Date: Sep 2007 Class/Position: O: Scout Affiliations: {NFO} - New Family Order Posts Rated Helpful 0 Times	Make sure none of your outside walls are func_details or displacements. Since neither of those block vis, they will create leaks if used for outside walls.

04-25-2008, 07:39 PM	#15
Dr.Satan Wiki Team Fortress Forever Staff Join Date: Sep 2007 Location: Greeley, CO Class/Position: Med / Solly Gametype: PAYLOAD Affiliations: DET- Posts Rated Helpful 19 Times	yeah that was it, thanks guys! That was the only other leak I had...shouldn't be long now! __________________ FF Community Map Pack(s): 1 / 2 (Released) conc_school \| hellion_classic \| ksour_PAYLOAD \| mulch_faf (Beta) alchimy_b1 (Lua) base_payload_2015 (Models) props_trainyard Support FF:

04-25-2008, 07:43 PM	#16
KubeDawg Nade Whore Server Owner Beta Tester Join Date: Sep 2007 Location: Oklahoma Class/Position: Scout/Soldier Gametype: CTF/TDM Affiliations: blunt. Moto Posts Rated Helpful 128 Times	pees pants OMG can't wait! __________________ Moto's Funhouse \| Dallas, TX - 74.91.114.247:27015 ff_plunder - Complete

05-09-2008, 09:25 AM	#17
zE Pew pew ze beams Join Date: Jan 2008 Gametype: Gathers Affiliations: pew pew Posts Rated Helpful 11 Times	materialPath: c:\games\steam\steamapps\SourceMods\FortressForeve r\materials Loading C:\Documents and Settings\Moi\Desktop\MAPS\rui.vmf fixing up env_cubemap materials on brush sides... 0...1...2...3...4...5...6...7...8...9...100...1... 2...3...4...5...6...7...8...9...10Processing areas...done (0) Building Faces...done (0) Chop Details...done (0) Find Visible Detail Sides...done (0) Merging details...done (0) FixTjuncs... PruneNodes... WriteBSP... NODRAW on terrain surface! NODRAW on terrain surface! NODRAW on terrain surface! NODRAW on terrain surface! NODRAW on terrain surface! NODRAW on terrain surface! NODRAW on terrain surface! NODRAW on terrain surface! NODRAW on terrain surface! NODRAW on terrain surface! NODRAW on terrain surface! NODRAW on terrain surface! NODRAW on terrain surface! NODRAW on terrain surface! NODRAW on terrain surface! NODRAW on terrain surface! NODRAW on terrain surface! NODRAW on terrain surface! NODRAW on terrain surface! NODRAW on terrain surface! NODRAW on terrain surface! NODRAW on terrain surface! NODRAW on terrain surface! NODRAW on terrain surface! NODRAW on terrain surface! NODRAW on terrain surface! NODRAW on terrain surface! done (0) writing C:\Documents and Settings\Moi\Desktop\MAPS\rui.prt...done (0) Creating default cubemaps for env_cubemap using skybox materials: skybox/ff_sky_clearblue.vmt Run buildcubemaps in the engine to get the correct cube maps. No such variable "$hdrbasetexture" for material "skybox/ff_sky_clearbluert" Can't load skybox file skybox/ff_sky_clearblue to build the default cubemap! Finding displacement neighbors... Finding lightmap sample positions... Displacement Alpha : 0...1...2...3...4...5...6...7...8...9...10 Building Physics collision data... done (1) (231569 bytes) Placing detail props : 0...1...2...3...4...5...6...7...8...9...10 Compacting texture/material tables... Reduced 1571 texinfos to 550 Reduced 89 texdatas to 72 (2973 bytes to 2385) Writing C:\Documents and Settings\Moi\Desktop\MAPS\rui.bsp 4 seconds elapsed 2 threads reading c:\documents and settings\moi\desktop\maps\rui.bsp reading c:\documents and settings\moi\desktop\maps\rui.prt 2296 portalclusters 7987 numportals 0...1...2...3...4...5...6...7...8...9...100...1... 2...3...4...5...6...7...8...9. This last part is taking some insane time no idea why.. Last edited by zE; 05-09-2008 at 09:34 AM.*

05-10-2008, 06:09 AM	#19
zE Pew pew ze beams Join Date: Jan 2008 Gametype: Gathers Affiliations: pew pew Posts Rated Helpful 11 Times	wow.. really hate that optimization stuff i think i gonna stick for the betas lolz

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)