Ok so a week ago i put together a
reprap prusa i3 3d printer from a kit i bought online. Im still working on fine tuning all the settings so the print is still a little messy, ill make a better one in future.
I thought some of you might be interested in my latest test piece, a lvl 3 sg from FF! I took the .mdl file from the game and ran it through a program called
crowbar to decompile it to a .smd file. From there i used
BlenderSourceTools to import the file into
blender which allows me to export as a .stl file.
I loaded the .stl up in a print control and slicing program called
MatterControl which i have found to make the best prints for this sort of situation.
After 3 hours of melting plastic i had a big mess which took a bit of filing and sanding to get to the product you see before you.
I drilled out all the pivot points and glued in
3mm neodymium magnets so it can move around as it does in game. (the dish on top is too fragile to have moving).
If anyone is interested in the stl file to print your own pm me, or with the dev's permission ill post it.
